|Innokin iTaste Variable Voltage V 4.0
Only From the Prospector Mall
Use the product options to the right to turn this battery into a kit. Your kit includes in the listed price 3 17ml sized bottles of our juice in your choice of flavor and nicotine strength.
You can also use the pull-down options and upgrade your bottle size and save even more while stocking up on juice.
If the Needle tip cap upgrade is selected, needle tips will be added for the number of bottles ordered. These Needle tip caps ease the filling of tank.
Use the other product options to add a tank and battery charger and make it a whole kit and have everything you need while saving even more!
If you add the tank option, price also includes a 5-pack of replacement coils for the tank you choose
This kit comes with a charger but you can choose another one from the menu. This optional charger is a multi-port charger and will charge more than one iTaste Variable Voltage e-cig at a time.
Primary Features of The iTaste VV4
Battery Level & Charging Indicators:
The iTaste VV4 battery capacity is displayed via green, yellow and red LED lights.
When the iTaste VV4 is fully recharged the LED light will power off.
Green = Almost fully Charged. Yellow = Half Power. Red = Low Power. Charge the unit.
Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.
Large battery capacity:
The iTaste VV4 e cigarette has a built-in 1000 mAh polymer Li-Ion rechargeable battery.
ON/OFF battery switch:
Press the power button three times in rapid succession to turn on the iTaste VV4. Once the iTaste VV4 is On hold down the power button to activate the atomizer and vape. When the iTaste VV4 is not in use, press the power button three times in succession to power off the iTaste VV4 Advanced Personal Vaporizer. Always power off the iTaste VV4 Advanced Personal Vaporizer when it is not being used, or when it is going to be stored in a pocket, bag or purse.
10 second cutoff:
If the activation button is held for 10 seconds the iTaste VV4 Advanced Personal Vaporizer will stop firing until the button is released and pressed again.
Low Voltage Warning & Over Discharge Protection
The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the iTaste VV4 Advanced Personal Vaporizer will power off automatically.
Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection protects the iTaste VV4 Advanced Personal Vaporizer against shorted atomizers and will stop the unit from functioning in unsafe conditions.
The iTaste VV4 features automatic real-time atomizer Ohms detection. If the resistance of the atomizer is lower than 0.8 the Ohms bar will blink.
If there is a short circuit the VV4 screen will display the following and the LED light will power off.
High compatibility 510/ego connector:
Threads are compatible with the following clearomizers: iClear16, iClear16B, iClear16D, iClear30, iClear30B, iClear30s, iClearX.I. Gladius and other standard 510 threading.
Variable Voltage: Voltage can be adjusted from 3.0 – 6.0 volts in .1 volt increments.
Variable Wattage: Wattage can be adjusted from 6.0 – 15.0 Watts in .5 watts increments.
Standby current: 50uA max ~ Maximum output current：4.0A
Charging: Micro USB DC5.0V/500mA ~ Short Circuit Protection: 0.8 Ohm
You can read or write reviews on our Innokin Variable Voltage kits at
|Return to Flavor List||Save with 3-Pack||Save more with 6-Pack|
|Batteries & Kits||Tanks, Clearos & Coils||Chargers & Accessories|